Global Knowledge

Junos Layer 3 VPNs

Par Global Knowledge

Objectifs

After successfully completing this course, you should be able to:

  • Describe the value of MPLS VPNs.
  • Describe the differences between provider-provisioned VPNs and customer-provisioned VPNs.
  • Describe the differences between Layer 2 VPNs and Layer 3 VPNs.
  • List the provider-provisioned MPLS VPN features supported by the Junos OS software.
  • Describe the roles of a CE device, PE router, and P router in a BGP Layer 3 VPN.
  • Describe the format of the BGP routing information, including VPN-IPv4 addresses and route distinguishers.
  • Describe the propagation of VPN routing information within an AS.
  • List the BGP design constraints to enable Layer 3 VPNs within a provider network.
  • Explain the operation of the Layer 3 VPN data plane within a provider network.
  • Create a routing instance, assign interfaces to a routing instance, create routes in a routing instance, and import/export routes from a routing instance using route distinguishers/route targets.
  • Describe the purpose of BGP extended communities, configure extended BGP extended communities, and use BGP extended communities.
  • List the steps necessary for proper operation of a PE-CE dynamic routing protocol.
  • List the troubleshooting and monitoring techniques for routing instances.
  • Explain the difference between the bgp.l3vpn table and the inet.0 table of a routing instance.
  • Monitor the operation of a CE-PE dynamic routing protocol.
  • Explain the operation of a PE multi-access interface in a Layer 3 VPN and list commands to modify that behavior.
  • Describe ways to support communication between sites attached to a common PE router.
  • Provision and troubleshoot hub-and-spoke Layer 3 VPNs,
  • Describe the flow of control traffic and data traffic in a hub-and-spoke Layer 3 VPN.
  • Describe QoS mechanisms available in L3VPNs.
  • Configure L3VPN over GRE tunnels.
  • Describe the RFC 4364 VPN options.
  • Describe the carrier-of-carriers model.
  • Configure the carrier-of-carriers and "Option C" configuration.
  • Describe the flow of control and data traffic in a draft-rosen multicast VPN.
  • Describe the configuration steps for establishing a draft-rosen multicast VPN.
  • Monitor and verify the operation of draft-rosen multicast VPNs.
  • Describe the flow of control traffic and data traffic in a next-generation multicast VPN.
  • Describe the configuration steps for establishing a next-generation multicast VPN.
  • Describe the configuration steps for establishing a next-generation multicast VPN.
  • Monitor and verify the operation of next-generation multicast VPNs.
  • Describe the flow of control traffic and data traffic when using MPVNs for Internet multicast.
  • Describe the configuration steps for enabling internet multicast using MVPNs.
  • Monitor and verify the operation of MVPN internet multicast.

Programme

Chapter 2: MPLS VPNs

  • MPLS VPNs
  • Provider-Provisioned VPNs

Chapter 3: Layer 3 VPNs

  • Layer 3 VPN Terminology
  • VPN-IPv4 Address Structure
  • Operational Characteristics

Chapter 4: Basic Layer 3 VPN Configuration

  • Preliminary Steps
  • PE Router Configuration
  • Lab: Layer 3 VPN with Static and BGP Routing

Chapter 5: Layer 3 VPN Scaling and Internet Access

  • Scaling Layer 3 VPNs
  • Public Internet Access Options
  • Lab: LDP over RSVP Tunnels and Public Internet Access

Chapter 6: Layer 3 VPNs – Advanced Topics

  • Exchanging Routes between Routing Instances
  • Hub-and-Spoke Topologies
  • Layer 3 VPN CoS Options
  • Layer 3 VPN and GRE Tunneling Integration
  • Layer 3 VPN and IPsec Integration
  • Layer 3 VPN Egress Protection
  • BGP prefix-independent convergence (PIC) edge for MPLS VPNs
  • VRF Localization
  • Provider Edge Link Protection
  • Support for configuring more than 3 million L3VPN Labels
  • Lab: GRE Tunneling

Chapter 7: Interprovider Backbones for Layer 3 VPNs

  • Hierarchical VPN Models
  • Carrier-of-Carriers Model
  • Option C Configuration
  • Lab: Carrier of Carrier Layer 3 VPNs

Chapter 8: Troubleshooting Layer 3 VPNs

  • Working with Multiple Layers
  • Troubleshooting Commands on a PE Device
  • Multi-Access Interfaces in Layer 3 VPNs
  • PE and CE-based Traceroutes
  • Layer 3 VPN Monitoring Commands
  • Lab: Troubleshooting Layer 3 VPNs

Chapter 9: Draft Rosen Multicast VPNs

  • Multicast Overview
  • Draft Rosen MVPN Overview
  • Draft Rosen MVPN Operation
  • Configuration
  • Monitoring

Chapter 10: Next Generation Multicast VPNs

  • Multicast VPN Overview
  • Next-Generation MVPN Operation
  • Configuration
  • Monitoring
  • Internet Multicast
  • Ingress Replication
  • Internet Multicast Signaling and Data Plane
  • Configuring MVPN Internet Multicast
  • Monitoring MVPN Internet Multicast
  • Lab: MVPN Internet Multicast

Formations de la même catégories (5)

Global Knowledge
Commutation avancée Junos - JuniperPar Global Knowledge

This two-day course is designed to provide detailed coverage of virtual LAN (VLAN) operations, Multiple Spanning Tree Protocol (MSTP) and VLAN Spanning Tree Protocol (VSTP), authentication and access control for Layer 2 networks, IP telephony features, class of service (CoS) and monitoring and troubleshooting tools and features supported on the EX Series Ethernet Switches. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and protocol operations. This course uses Juniper Networks EX 4300 Series Ethernet Switches for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS. Optional lab components are available allowing attendees to perform network management and troubleshooting tasks using Junos Space Network Director 3.0. This course is based on Junos OS Release 17.1R1.8.

Advanced Junos Enterprise Switching (AJEX) is an advanced-level course.

Global Knowledge
Junos Layer 3 VPNsPar Global Knowledge

This three-day course is designed to provide students with MPLS-based Layer 3 virtual private network (VPN) knowledge and configuration examples. The course includes an overview of MPLS Layer 3 VPN concepts, scaling Layer 3 VPNs, Internet access, Interprovider L3VPNs, and Multicast for Layer 3 VPNs. This course also covers Junos operating system-specific implementations of Layer 3 VPNs. This course is based on the Junos OS Release 15.1R2.9.

Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and in device operations. JL3V is an advanced-level course.

Global Knowledge
Junos MPLS FundamentalsPar Global Knowledge

Cette formation est délivrée en synchrone à distance tout en garantissant l'accès à un environnement d'apprentissage complet!

Cette formation permet aux participants d’acquérir les connaissances et compétences nécessaires sur MPLS (Mulitprotocol Label Switching)
Après la présentation des concepts tels que MPLS et la structure des en têtes MPLS, la formation aborde de façon approfondie la configuration et le fonctionnement des deux principaux protocoles de distribution, RSVP et LDP. Un focus est principalement porté sur des sujets tels que l’ingénierie de trafic, la protection du trafic MPLS y compris fast reroute, la protection des liens/nœuds, et LDP Loop-free Alternate.
Les concepts sont mis en pratique via des labs, qui permettent aux participants d’acquérir de l’expérience dans la configuration et la surveillance de MPLS sur des périphériques Junos OS.

Global Knowledge
Commutation pour réseaux Service Provider - JuniperPar Global Knowledge

Cette formation est délivrée en synchrone à distance tout en garantissant l'accès à un environnement d'apprentissage complet!

Cette formation Juniper permet aux participants d’acquérir les compétences et connaissances nécessaires sur les concepts de commutation, dédiés aux services providers (opérateurs de services).

La formation est basée sur la version 12.3R1.1.7. du système Junos.